|
The days of flimsy Baja Kits are over! Ours are heavy duty and have a nice fit. Standard kit is good, deluxe kit is better, with stronger rear fenders for an updated look and a change in lites available too! Any baja part is available separately, call for pricing.
vintage look sun visor, will fit all bugs except 1973 and newer Super Beetles. Attaches to the rain gutter, and allows air to pass thru the underside for performance and durability. Comes with hardware, easy to install.
Price is $79.99. Comes in a smooth gelcoat finish.
|
||||||||||||||||||||||||||||
|
Battery Acid ruins metal, but not fiberglass! This tray comes with an easy release strap an d will fit most cars, trucks or boats. A must have for all VW's.
|
||||||||||||||||||||||||||||
|
Do what you will with our finest show quality Dashes! Smooth curves flow into a wrap around style that expands the interior of your VW. There's plenty of room in the dash area, as well as in the console for extra gauges, stereo stuff and whatever else your little heart desires. (Put'em wherever you want, no openings have been drilled!) Two studs that are bonded to the back, hold the dash firmly up against windshield rubber. It fits right over the metal dash, (plastic skin must be removed), but some cutting of the metal may be needed to fit custom gauges and things. No adjustment is needed to your steering column; and the smooth gelcoat finish paints easily, with maybe a little prep work here and there, if you want it super shiny.
The "Split Dash" is the dash used in the first VWs. It had a glove box on both the driver and pass sides, and gauges in the middle. We filled the glove boxes in, so you can open them up or keep them closed (glove box inserts avail soon). On our demo car, we will be installing 3 guages on the driver side, speedo and tach in the center, and then a glove box on the pass side when its ready. Our under dash holder fits real nice under the Split Dash, for a stereo unit. It bolts in right over the metal stock dash, and the only modification is the steering column on some years needs to be lowered slightly.
No holes have been predrilled and they come in a nice white gelcoat finish. They fit all bugs, except 1973 and later Super Beetles. With our Rear Split Window Kit, this really complements it! Special price of $109.99. |
||||||||||||||||||||||||||||
|
Well, you asked for it, and here it is! Durable fiberglass to hold all the gauges you want, without cracking, makes this the best dash on the after market! Clean lines and smooth styling give you the classic look you've all been begging us for. No openings have been drilled, so you can do your own layout. The CLASSIC DASH fits right over the metal dash, (plastic skin must be removed). Mounting hardware included. We now have this dash to fit your original speedo. It's recessed to match up so you don't even have to remove your speedo! The Classic Console is a compliment to the Classic Dash! The Console fits under the ashtray area and around shifter. No openings are drilled, so you can put gauges as shown or your stereo. There's a 4"x10" panel for accessories available in black or white texture or sand it smooth!
|
||||||||||||||||||||||||||||
|
These Flame Door Panels are like something you would see in a high priced street rod! Handcrafted in fiberglass, black or white in gelcoat. We can also upholster them in tweed material. Available in almost any color you can think of! Hardware included. What about the rear quarters? We don't make flame rears as they are too small to show well. Cover yours with matching tweed it looks good!
|
||||||||||||||||||||||||||||
|
Heavy, high quality fiberglass early-style "W" Deck lids made in two versions. The "Racing" version is made with the outer skin only, is lighter in weight, and fastens with the body clips you provide. The "Street" version is made with two parts, the outer and inner shells - and then bonded together in a manner that allows you to install like original lid, new hinges are included. It's also much heavier than the "Racing" version.
"This is your split widow kit along with W deck lid, we installed it into a 1963 rag top bug. We put on larger fenders, made our own running boards, tail lights, spare tire holder roof rack." See more pictures at WWW.KOOBLEKAR.COM
|
||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
|
The great things about this kit is it's designed for VW's! It has a lifetime warranty, and can be used with stock windows or "one piece" windows. After removing all the old regulators, it bolts into place, wires up and fastens to your original window channel. Includes switches, wiring and all those important instructions!
|
||||||||||||||||||||||||||||
People will look at our "split window" car and say, "Why the different taillights?" But with a closer look, you see the right side is a 3" wider, with our new recessed light kit, while the left is a 2" wider, using the teardrop taillights. We even make 4.5" widers for rear radicals! You can't get a better fiberglass fender with that "rolled" under edge! And for those vintage nuts, we make stock fenders that look like German originals!
The cool thing about our front Widened Fenders are the pre installed headlight buckets. No more "mickey mousing" the headlights. Tabs will hold the chrome ring as well as the housings. What a big difference!
*(Specify early or late model headlights)
A perfect compliment to the big ol fat fenders are our widened bumpers. We started with 1966 early style bumper blades, then widened them to fit our 2 and 3 inch fenders. They come with metal brackets and can be attached with bolts or the brackets can be bonded to the bumpers for a very clean smooth look. Remember these are show bumpers and are not much help in a crash, but then the original ones were not much more protection either!
This is a replica of a the original German 1959 and older stock front fender. Not many people know that in 1960 the front headlight area became more blended into the fender. The 59 and older ones had more of a "bubble" of the headlight area. At swap meets rusty beat up ones have sold for $300 each! This fender is shown on a 1970 bug, so they will fit all years except Supers. The early headlight assembly fits into a nice fiberglass bucket that is bonded into the fenders. We never predrill ANY holes for bumpers, turn signals, ect, so you can go stock or custom.
Also shown here is our "snake eye" turn signal/markers, which come in amber or clear, which are $29.99 a pair. We still just price the fenders at $109.99 each, even tho they could sell for more, but we are not like that! Available only at Glass Action.
|
||||||||||||||||||||||||||||
They're back!!! These were made from original skirts, complete with hardware bonded in and trim gasket. As with all fender skirts, the condition of your fenders will be important to the fit. Please call with
Fits Metal Fenders Only
|
||||||||||||||||||||||||||||
|
Never-Rust Floor Pans - Install or repair your floors for the last time, with these super strong fiberglass floorpans. Built as exact replicas of the original ones, they simply bolt into place after removing your rusted metal. Battery acid will not harm fiberglass. Hardware package available. Includes Instructions. Shown with bottoms up (No need to undercoat) HARDWARE PACKAGE for installing your floors. Includes self-tapping sheet-metal screws with washers (enough for both floors), and 50 year black silicone sealant for years of water tight, weatherproof wear.
Just need half? A floorpan section that covers where your battery fell through. (Approx. 36" long, for '72 & older Beetles only.)
|
||||||||||||||||||||||||||||
|
We carry the full line of VDO gauges and sending units. Please call if you don't find what you are looking for!
|
||||||||||||||||||||||||||||
|
We search out anything we can use for our VS's. These turn signals are real clean. Flush mount to your bumper, fender or side quarter panel. Amber, clear, or red, you pick... all the same price!
|
||||||||||||||||||||||||||||
Recessed Lite Kit -
|
||||||||||||||||||||||||||||
|
Turn Signals
|
||||||||||||||||||||||||||||
|
Our Mini Skirt is a cover that lays over your old apron to hide exhaust holes and any damage. Your old apron needs to be somewhat straight for this to work. The replacement aprons also have exhaust holes filled. Your old apron must be removed and the new one bolts in place. Also can be unbolted for easy removal for engine swaps!
|
||||||||||||||||||||||||||||
|
A typical area prone to rust. Looks and fits like an original part:
|
||||||||||||||||||||||||||||
|
So you got fat fenders, now your running boards look puny. Our Widened running boards flare out to match the fat fenders. And we even have stock running boards; once they are painted to match the car - it gives that "rich" look!
|
||||||||||||||||||||||||||||
|
These are just like the old "Empie" ones, except made of fiberglass. They can be bonded or screwed on and painted to match your car!
|
||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
|
Rear Speaker Panels - The One That Fits!
Fold down your back seat and you can install this with the screws included. It has tabs on both ends that you will need to predrill holes thru. Though, it doesn't need it for support, the front part will "sit" on the metal strip that is behind the back seat. you will have access to your speakers, because it does not attach to the rear seat. This Speaker Panel is very sturdy , and has two 10" by 14" areas for large speakers and will outlast those particle board imitations.
|
||||||||||||||||||||||||||||
|
A cool project to make your bug look like the '46-'52 models! Use it
|
||||||||||||||||||||||||||||
Adapter Kits $29.99 / ea. |
||||||||||||||||||||||||||||
All come with a "free" VW logo on horn button! |
||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
|
Hidden Stereo Glove Box |
||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
"Hide" that expensive stereo in the glove box. Our unit replaces your old
|
||||||||||||||||||||||||||||
